About sex toys materials

1. TPE10~15 degree material

It is generally used in the production of female dildos. For thicker or solid products, transparent TPE (based on SEBS) or TPR (based on SBS) with a hardness of generally 10 to 15 degrees. The cost of SBS substrate TPR is lower than SEBS substrate TPE, but TPR material sex toys are more likely to change color, and the touch and tensile properties are also poor; hollow or thinner products usually have a hardness of 0~5A (even lower than OA) The transparent soft TPE, the processing method is injection molding. 



2. TPE 0 to 10 degrees material

Generally used in the production of women's vibrating ring, bow tie and other sex toys accessories, the vibrating ring needs a hardness of about 5 degrees TPE. High requirements for transparency and pull. The background color depends on different manufacturers. Generally, the base material uses SEBS or SEEPS as the base, and the processing method is injection molding. 



3. Materials below TPE 0 degrees

TPE materials below 0 degrees (such as 00,000 or expressed by C, C is the hardness unit of super soft materials measuring Shore hardness below A0 degrees), used to produce male toys, such as airplane cups, airplane covers, etc. The molding process can be selected Infusion, injection molding, etc. 



4. TPE super soft material

At present, sex toy manufacturers have relatively high requirements for transparency of TPE materials, and the background color of the materials is required to be transparent and not yellow. There are two main factors affecting the transparency of TPE raw materials. One is the choice of the origin and grade of the SEBS substrate. Generally, the transparency of imported SEBS substrate TPE will be better than that of domestic products. The second is the injection temperature of TPE super soft material during processing. Sometimes the low injection temperature will affect the transparency of the product, especially for high molecular weight SEBS modified TPE.